NAS
do you mean RAID?, that is usually handled by the motherboard not the OS, you might want to look at your motherboard settings.
then again I haven't heard of NAS so my info may be old
http://www.thegeekstuff.com/2010/08/raid-levels-tutorial/
https://en.wikipedia.org/wiki/Standard_RAID_levels
Comment has been collapsed.
I like NAS for external storage. How I did it was with a raspberri pi (running samba server) + an external hardrive. It's cheap and you can keep adding as many harddrives as you want. At the same time the raspberri pi functions as media center (running kodi) for my tv.
Comment has been collapsed.
How many computers do you use to access that data? Because NAS is only a good option if you need to access the data from several computers, possibly even remotely. Or if you need a metric asston of storage for, for example, raw unedited video footage. If neither of those have a "yes" answer, then buy a new HDD or more likely a new PSU that won't drop wattage on that SATA cable this often.
If you decide to have a NAS because of that, then the next question is how sensitive the data is. Would it really hurt to lose it? If yes, then two-disk and RAID. If not, one disk is enough for home server purposes.
Comment has been collapsed.
Two computers and maybe even remote access would be sometimes good.
I do not think that PSU is bad, it is just 2 years old, and disconnection happen even without any load. (I even changed power cable to this HDD and also SATA port, but it happened again. Next time I will change SATA cable to different one)
You are right, maybe just the one-disk NAS would be enough, because I have backup of my critical data on my second computer (it is old and with small HDD)
Comment has been collapsed.
Sudden frequent disconnect is usually power drop. If it is not the cable (most frequent culprit), then it can be the PSU or the HDD itself. Just for this problem alone, I'd rather take a new HDD, not a significantly more expensive NAS. Heck, if you need only a single-disk setup, I'd just get a router with a USB port and plug an external HDD into it. Slower, yes, but for a cheap NAS it is more than enough. And if you use a 3.5" one with external power supply, you can get up to 6 TB of storage for about half the money a similar NAS would cost.
Comment has been collapsed.
23 Comments - Last post 50 minutes ago by Carenard
283 Comments - Last post 1 hour ago by pb1
2 Comments - Last post 2 hours ago by adam1224
4 Comments - Last post 3 hours ago by Chris76de
350 Comments - Last post 3 hours ago by madjoki
10 Comments - Last post 6 hours ago by 1312poggerson
0 Comments - Created 6 hours ago by Warriot
109 Comments - Last post 6 minutes ago by RePlayBe
19 Comments - Last post 11 minutes ago by DkXfS
81 Comments - Last post 39 minutes ago by Vasharal
11,230 Comments - Last post 52 minutes ago by CultofPersonalitea
11 Comments - Last post 53 minutes ago by M0J
101 Comments - Last post 55 minutes ago by Thedarksid3r
3,938 Comments - Last post 1 hour ago by lucasscarlet
Hello,
I have some problems with my 3TB HDD in my computer, from time to time it disconnects and sometimes it makes my system freeze.
This was on my 8.1 windows and now in windows 10 it is even more common :-(
I think it could be HDD problem and not just software. (I even dissabled the turning off disc feature in windows, but it did not help)
I was thinking about home NAS server (what is NAS?), but I do not know, if is better to have just 1 drive NAS or 2 drives NAS...
If NAS fails, it does not matter if there is 1 or 2 drives in it. But if disc fail, the second one will still work, but still I will have duplicitly stored data (on my PC and also on my future NAS)
Thank you
Comment has been collapsed.